Banner Banner

How do I unlock/lock my Antler case?

This information should have come with your lock. Otherwise, you can follow the instructions below.

Does your lock look similar to this?
Product Product
  • The lock is originally set to open at 0-0-0. To set your own personal combination, follow these steps:
  • 1. Turn the dials to their original number 0-0-0.
  • 2. Press down the reset button (a) with a pen (or similar) until you hear a ‘click’ sound.
  • 3. Set your personal combination by turning the dials (b), for example 8-8-8.
  • 4. Push the button (c) in the direction indicated by the arrow towards the dials and the reset button will ‘click’ back into place.
  • 5. Your personal combination is now set.

Warning: If the lock cylinder is open, lock it again by turning the lock anticlockwise to the red dot position (any tool which can be inserted into the lock cylinder is ok to use).

Does your lock look similar to this?
Product
  • The combination is set to open at 0-0-0 - to set your combination:
  • 1. Turn the dials to 0-0-0.
  • 2. Depress the “change button” firmly with a pen (or similar). A *click* will be heard and the button will remain depressed.
  • 3. Turn the dials to your personal combination, choosing an easily remembered number. (eg. Birthday)
  • 4. Push the “release button” inwards and the “change button” will click out to its original position. Your combination is now set.
  • 5. If you wish to change the combination repeat steps 2-4.
Does your lock look similar to this?
Product
  • The combination is set to open at 0-0-0 - to set your combination:
  • 1. Pull up the shackle (1) to open the lock.
  • 2. Rotate the shackle 90° counterclockwise and press shackle (1) into hole (2). Hold down and continue to turn another 90° counterclockwise or more.
  • 3. Set up your own combination by turning dials.
  • 4. Turn the shackle back as normal. Then the setting is completed. To reset a new combination, please repeat steps 1-4 above.